Fountain Pens—Lamy 2000
This week’s post is about my experience with the Lamy 2000. It is my most recent fountain pen acquisition from several months ago as a graduation present. Since then it has been constantly inked and has become the pen which I use the most. Much of the novel I am currently writing has been written with this pen. It is a standard makrolon model with a medium nib. Like the vintage Conklin Nozac from last week, it is a piston filler. Since the pen was commemorating my graduation with a master’s degree, it was engraved with my name as it appears in my thesis and on my diploma—Jeffrey R. Nau.
Although I haven’t had this Lamy 2000 fountain pen for as long as many of my other pens, it is already the one I have changed inks most often in. I write with it until it runs out of ink and then put a different ink in it rather than just refilling with the same ink. Usually, I settle on one or two inks I will repeatedly put into a pen. For the Lamy 2000, I started with the Lamy Special Edition 2019 Bronze ink I had gotten at the same time and didn’t like the look. It was too light of an orange on the page. So, I decided to go through all the inks I have just to try them all in the same pen (almost all the inks; there are few specialty inks that I only use in certain pens). I might have settled on which inks I will regularly use in my Lamy 2000, but I will need to go back to those inks and write more. One of the things I enjoy about fountain pens is how different inks can look depending on the fountain pen and paper. Each ink I have tried in the Lamy 2000 almost makes it a new writing experience, while maintaining the now-familiar comfort of the pen design and smooth nib.
Fountain Pens - Conklin Nozac
Although this is technically my second blog post, I am considering it my first real one. The first one was more like a Forward or Introduction to the main content.
So, as my first (really second) post, I decided to start with something about the fountain pen shown on my homepage. (It’s okay if you didn’t even realize there was an image there with a fountain pen. Go look if you want but come right back here.)
This fountain pen is one I got from my grandfather. He found it in his desk one day and gave it to me. It turned out to be one of the fountain pen models I had hoped to someday add to my collection. The fountain pen is a Conklin Nozac. A vintage one from the 1930s.
The pen is made from green celluloid in a faceted shape. Between the green stipes are translucent stripes, although they are difficult to see without holding the pen up to the light. The nib is 14k gold which is ground a little on the stub side and has a small amount of flex to it. It was made in Toledo, Ohio which I like as it is my home state (fun fact: Toledo is also the home of Klinger in M*A*S*H).
What I especially like about this pen, aside from the striped celluloid, is the filling system. Unlike most American-made fountain pens of its time, the Conklin Nozac had a piston filling system. Hence its name, for the lack of the then-common rubber sac in pens that held ink. Nozac = no sac. The pen also features a “word gauge” on the barrel. It is meant to indicate how many more words I can write. I tend to use it to see how many words of a chapter I have written.
Like many vintage fountain pens, the pen was covered in dry ink. I enjoy restoring the vintage fountain pens I collect, so I took it apart and cleaned it. I was surprised to find the cork used as the piston seal was intact. Even more surprising (to me anyways) was that I managed to bring the cork seal back into working condition without having to replace the cork like I was prepared to do. This fountain pen is 80-something years old. It still works almost as if it were new.
Welcome to the Blog of J.R. Nau
As this is the start of my new blog, this post is the obligatory post about the kinds of things to expect here. This post coincides with the launch of my new website. I did have a personal website previously, but it was used primarily as a component of my work in graduate school. Now that I have graduated and am working toward beginning my professional career, I decided to completely re-design my website. That included the initialization of this blog.
The aim for this website—and this blog—is to provide a central hub for my projects and showcase some of my other interests. So, there will be a few things you can expect to find in this blog following that aim:
J.R. Nau - developer of the VR Museum and author of the Varynna series.